Item Number
Description
Data Sheet
MSDS

21EP001

 Economical, red oxide utility primer for structural shops requiring a fast drying protective coating for prefabricated structural elements
21VW120
 2 component conversion primer suitable for aluminum, glavanized metal, stainless steel or steel substrates designed to promote adhesion with other surfacing primers or topcoats.
21WP153
 21WP153™ is a chromate polyvinyl two component etch primer. It is designed to meet DOD-P-15328/Mil-P-15328 navy formula. 21WP153™ is intended for use on clean metal surfaces of all types as a treatment prior to the application of primer and top coat system. It is especially effective on hard to adhere surfaces such as aluminum and galvanized steel. It is not intended as a permanent protective primer in itself although some protection is afforded for short periods of time. To ensure best results, the pretreatment primer should be coated with a primer and top-coat as soon as possible.
21EP150 III
 Mil-P-24441B Type III Epoxy Polyamide Primer (Grey)
21EP150 IV
 Mil-P-24441B Type IV Epoxy Polyamide Primer (Grey)
21EP151 III
 Mil-P-24441B Type III Epoxy Polyamide Primer (Grey)
21EP151 IV
 Mil-P-24441B Type IV Epoxy Polyamide Primer (Grey)
21EP152 III
 Mil-P-24441B Type III Epoxy Polyamide Primer (Off White)
21EP152 IV
 Mil-P-24441B Type IV Epoxy Polyamide Primer (Off White)
21EP159 III
 Mil-P-24441B Type III Zinc Rich Epoxy Polyamide (Grey)
21EP230
 2 component, high solids, high build, fast dry epoxy polyamide suitable for immersion service. It is used as a primer on boat and yacht hulls prior to the application of 51PC150, 51PC151 No-Tox coatings.
21EP235
 2 component, high performance, surface tolerant epoxy polyamide suitable for immersion and non-immersion applications over concrete and steel.
21EP600
  
21EP800
 High performance Industrial and Marine epoxy
21EP812
 100% solids, 0 VOC epoxy for application in high humidity or moist environments with low temperature cure
21EP818
 91% solids, high performance self-levelling flooring epoxy
21EP819
 90% solids, high performance flooring epoxy for vibration resistant applications
21EP820
 100% solids, 0 VOC interior/exterior pipe coating
21EP830
  
21EP840
 90% solids extreme tank lining epoxy, MDEA, Caustic Soda etc.
21EP919
 71% solids general purpose tank lining