To meet the demands of the building owner and architect, these alucobond panels on the front entry were painted with our 51PC100 fluorinated polyurethane.

This coating has a superior colour and gloss retention as compared to conventional urethane technology.		 This roof top building was coated with our 41PC600 conventional urethane finish. This same product is ofeten sepcified as a finish coat for bridges.
Our Decryl metallic silver was tinted to match the silver facade of the building previously done in coil coated alucobond panels.

The metallic was then clear coated with a semi-gloss finish of the 51PC100 fluorinated polyurethane to extend colour and gloss retention.		 This coating applicator applied 51PC101 anti-graffiti coating to these sign components for a large sign manufacturer.

The coating will help ease graffiti removal as they are prone to "tagging". The coating also maintains excellent colour and gloss retention far superior to conventional coating systems.
Our architectural coating systems offer many advantages over conventional systems typically used to refinish architectural structures.
Impervious to moisture and oxygen permeation
Osmotic Barrier for Immersion Applications
Superior Adhesion and self-priming properties
Highly Flexible and free from embrittlement
Graffiti release properties make clean up easy
UV Insensitive - enhanced color and gloss retention (30 yrs+)
Resistant to Chemical Attack
Impact and Abrasion Resistant - exceeds ASTM Standards
Hydrophobic and Oleophobic Properties
Low VOC's as compared to conventional urethane coatings
As a top-coat used in conjunction with our primers and intermediate coatings, we can enhance the lifecycle of a coating system by many multiples. FPU provides enhanced resistance to environmental conditions such as industrial fallout, UV exposure, salt air, high humidity as well as osmotic barrier properties to reduce permeation of moisture through the coating system; corrosion cell activity is reduced significantly.